field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

Qualifications:High school diploma or general education degree (GED) preferred.1-3 months of order pulling experience preferred or equivalent combination of education and distribution experience may be substituted.Physical Requirements:&nbsp;The requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employeeMust be able to stand up to 8- 10 hours in a day.Must be able to walk up to 8-10 hours.Will continuously reach up and out.Will occasionally climb stairsWill occasionally push/pull up to 25 pounds and occasionally push/pull up to 50 pounds.Will frequently lift up to 20 pounds and occasionally lift up to 50 pounds.Will occasionally have repetitive foot movement.Will frequently have repetitive hand/arm movements for simple reaching, simple and firm grasping, and/or fine hand manipulation.Specific vision ability required by this job includes close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.Use hands to finger, handle or feel objects; and reach with hands and arms.Needed Skills:Ability to print and speak simple sentences well both written and verbally, in English.Ability to read a limited number of two and three syllable words and to recognize similarities and differences between words and between a series of numbers.Ability to add and subtract basic mathAbility to apply common sense understanding to carry out instructions furnished in written, oral, or diagram formAbility to deal with problems involving several concrete variables in standardized situationsWork Environment:&nbsp;The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.The work performed is in a distribution environment which means-The employee is frequently exposed to vibrations and dust and will be working around moving machineryThe noise level in the work environment is usually moderate at low decibelsMust be able to work in a fast paced, team environment&nbsp;<ul><li>Safely perform assigned warehouse functions utilizing established processes, procedures and tools while meeting performance expectations.</li></ul><ul><li>Functions may include, but are not limited to unloading, put-away, sorting, labeling, picking, packing, replenishing, auditing, shipping, making boxes, etc.</li></ul><ul><li>Complies with ReaderLink practices, policies, guidelines and procedures as well as state and federal regulations.</li></ul>ReaderLink is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. EOE/Minorities/Female/Disabled/Veteran.ReaderLink is committed to recruiting, hiring and promoting people with disabilities and veterans. If you need an accommodation to assist with completing the electronic application, please email your request to <a href="mailto:info@readerlink.com" target="_blank">info@readerlink.com</a>.

ReaderLink

General Warehouse Associate- 2nd Shift $18.50/hr.

You Lead the Way. We’ve Got Your Back.With the right backing, people and businesses have the power to progress in incredible ways. When you join Team Amex, you become part of a global and diverse community of colleagues with an unwavering commitment to back our customers, communities and each other. Here, you’ll learn and grow as we help you create a career journey that’s unique and meaningful to you with benefits, programs, and flexibility that support you personally and professionally.At American Express, you’ll be recognized for your contributions, leadership, and impact—every colleague has the opportunity to share in the company’s success. Together, we’ll win as a team, striving to uphold our company values and powerful backing promise to provide the world’s best customer experience every day. And we’ll do it with the utmost integrity, and in an environment where everyone is seen, heard and feels like they belong.Join Team Amex and let's lead the way together.American Express entered the travel agency business in 1915 and today is one of the world’s largest luxury travel and lifestyle service networks. American Express Travel provides exclusive access, differentiated value, extraordinary service, and unrivaled expertise to premium Card Members seeking leisure or business travel, as well as a variety of lifestyle services.&nbsp;The TeamThe Global Strategic Partnerships and Marketing team at American Express Travel brings together the best travel partners in the world to create unparalleled value and unforgettable experiences across the travel journey - and amplifies this to Card Members wherever they are.The RoleThe Senior Manager, Hotel Inventory &amp; Connectivity will be responsible for hotel connectivity strategy and management, ensuring an optimized end-to-end distribution process for hotel partners with a focus on Fine Hotels + Resorts and The Hotel Collection properties. They will implement these strategies through effective project management and collaboration across key stakeholders.&nbsp; This person will operate with a will-to-win, desire to challenge the status quo, and a focus on doing what’s right for our customers, colleagues and stakeholders. Key Responsibilities:<ul><li>Collaborate closely with the Hotel Partnerships Team to enable a seamless experience for hotel partners that maximizes hotel partners’ use of their channel management technologies</li><li>Oversee all technical and operational aspects of rate, inventory and availability distribution</li><li>Create and communicate hotel connectivity strategies to drive operational ease and support growth</li></ul>Minimum Qualifications:<ul><li>5+ years hotel connectivity experience including familiarity with a variety of Property Management Systems, Central Reservation Systems, channel managers and Global Distribution System (GDS)</li><li>Outstanding communication skills with the ability to clearly communicate complex concepts and bring multiple teams and senior leaders along to a final plan</li><li>Excellent interpersonal skills with demonstrated experience collaborating cross-functionally </li><li>Proven track record of thought leadership and innovation in an unstructured space</li><li>Energetic self-starter with strong project management skills, attention to detail, and ability to “get into the weeds”</li><li>Change agent and strategic problem solver with an ability to learn quickly, pull in multiple viewpoints, “connect the dots”, and drive results</li><li>Capacity to multitask and prioritize between business development and project execution tasks</li></ul>Salary Range: $90,000.00 to $165,000.00 annually + bonus + benefitsThe above represents the expected salary range for this job requisition. Ultimately, in determining your pay, we’ll consider your location, experience, and other job-related factors.We back our colleagues and their loved ones with benefits and programs that support their holistic well-being. That means we prioritize their physical, financial, and mental health through each stage of life. Benefits include:<ul><li>Competitive base salaries&nbsp;</li><li>Bonus incentives&nbsp;</li><li>6% Company Match on retirement savings plan&nbsp;</li><li>Free financial coaching and financial well-being support&nbsp;</li><li>Comprehensive medical, dental, vision, life insurance, and disability benefits&nbsp;</li><li>Flexible working model with hybrid, onsite or virtual arrangements depending on role and business need&nbsp;</li><li>20+ weeks paid parental leave for all parents, regardless of gender, offered for pregnancy, adoption or surrogacy&nbsp;</li><li>Free access to global on-site wellness centers staffed with nurses and doctors (depending on location)&nbsp;</li><li>Free and confidential counseling support through our Healthy Minds program&nbsp;</li><li>Career development and training opportunities</li></ul>For a full list of Team Amex benefits, visit our Colleague Benefits Site.American Express is an equal opportunity employer and makes employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, age, or any other status protected by law.We back our colleagues with the support they need to thrive, professionally and personally. That's why we have Amex Flex, our enterprise working model that provides greater flexibility to colleagues while ensuring we preserve the important aspects of our unique in-person culture. Depending on role and business needs, colleagues will either work onsite, in a hybrid model (combination of in-office and virtual days) or fully virtually.US Job Seekers/Employees - Click here to view the “Know Your Rights” poster and the&nbsp;Pay Transparency Policy Statement.If the links do not work, please copy and paste the following URLs in a new browser window:&nbsp;<a href="https://www.dol.gov/agencies/ofccp/posters&nbsp;to" target="_blank">https://www.dol.gov/agencies/ofccp/posters&nbsp;to</a> access the three posters.Employment eligibility to work with American Express in the U.S. is required as the company will not pursue visa sponsorship for these positions.

American Express

Senior Manager, Hotel Inventory & Connectivity

Basic Purpose
The purpose of the lead maintenance mechanic is to troubleshoot, repair and perform predictive and preventative maintenance of packaging, milling, and blending equipment. Secondary duties include, but are not restricted to, upgrading and installation of new equipment, electrical, welding, machining, mechanical, etc., while maintaining the highest safety, quality, cost and GMP standards in a high-speed manufacturing environment.
Tasks are to be completed while maintaining the highest safety, food safety and quality, cost and GMP standards in a high-speed manufacturing environment.&nbsp;
Essential Duties and Responsibilities:
<ul>
<li>Troubleshoot machine malfunctions and make repairs in expeditious manner.</li>
<li>Perform weekly preventative maintenance functions.</li>
<li>Perform yearly rebuilds on assigned equipment.</li>
<li>Participate and assist in the installation of new machinery.</li>
<li>Inspect machines for parts wear and recommend/participate in making necessary repairs.</li>
<li>Ensure that all paperwork including daily end of shift reports, inventory, safety sheets (ex: hot work permits, confined space) and supply requisitions are accurate.</li>
<li>Report food safety and quality issues and initiate action, as necessary.</li>
<li>Follow all Food Safety guidelines, but not limited to:
<ul>
<li>GMP’s</li>
<li>Allergen Program</li>
<li>Quality</li>
<li>Sanitation</li>
<li>Safety</li>
</ul>
</li>
<li>Additional duties and various projects as needed.</li>
</ul>
Minimum Requirements:
<ul>
<li>Minimum three years’ experience in a mechanical repair capacity or related role within a manufacturing environment.</li>
<li>Industrial electrical/mechanical maintenance experience strongly preferably in a packaging manufacturing environment, or similar education and/or experience with PLC is highly desired.</li>
<li>Possess own hand tools outlined by Celestial Seasonings. </li>
</ul>
Supervisory Responsibilities:
<ul>
<li>Coordinate daily activities with maintenance team.</li>
<li>Provide coaching, direction, and training.</li>
<li>Provide input on hiring and performance appraisals. </li>
<li>Coordinate completion of planned preventative maintenance.</li>
<li>Communicate with Production Team Leads to determine daily priorities.</li>
<li>Review and verify that technician is delivering high quality repairs and PM’s.</li>
</ul>
Skills/Knowledge/Abilities:
<ul>
<li>High school diploma or equivalent required.</li>
<li>Experience troubleshooting and installing high speed industrial machinery.</li>
<li>Project management – ability to see job through to completion with attention to detail in a timely manner.</li>
<li>Ability to work within a team concept. Flexibility is an asset.</li>
<li>Strong background in electronics and PLC controlled processes.</li>
<li>Strong machining and welding skills are desirable.</li>
<li>Strong safety record.</li>
<li>Good attendance and dependability a must.</li>
<li>Must be physically able to lift 50 lbs.</li>
<li>Must have computer skills to look up part location/availability on computer using maintenance software.</li>
<li>Ability to communicate with other mechanics and be able to explain mechanical processes and theory.</li>
<li>Ability to meet attendance guidelines and work additional hours/OT as needed.</li>
<li>Ability to maintain an effective working relationship with all contacts both inside and outside the company.</li>
</ul>
Physical Requirements/Work Environment:
<ul>
<li>The employee must frequently lift and/or move up to fifty pounds and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus.</li>
<li>Regularly required to work around operating equipment, stand, reach, pull, stoop and bend</li>
<li>While performing the duties of this job, the employee is required to sit or stand. The employee is frequently required to use their hands and fingers to handle, feel objects, use tools or controls, and climb or balance.</li>
<li>While performing the duties of this job, the employee is occasionally exposure to moving mechanical parts,&nbsp;fumes or airborne particles, low levels of toxic or caustic chemicals, risk of electric shock and explosives.</li>
<li>The noise level in the work environment is usually moderate. However, some instances of this job may require work in areas where ear protection if necessary.</li>
</ul>
Compensation and Benefits:
<ul>
<li>New starting wage is $30.00 / hourly (commensurate with experience and location). *Note that rate could change based on shift schedule.)</li>
<li>$.50 differential pay.</li>
<li>Medical, Prescription, Dental, Vision Coverage</li>
<li>Flexible spending accounts</li>
<li>Disability coverage</li>
<li>Life insurance</li>
<li>Critical illness and accident insurance</li>
<li>Legal and identity protection insurance</li>
<li>Pet insurance</li>
<li>Employee assistance program</li>
<li>Commuter benefits</li>
<li>Tuition assistance</li>
<li>Adoption and surrogacy assistance</li>
<li>401(k)</li>
<li>PTO</li>
<li>Parental Leave</li>
<li>Maven Family Planning</li>
</ul>
Hain Celestial is an equal employment opportunity/affirmative action employer. The Company does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, expression, genetic information, protected veteran status or any other characteristics protected by applicable federal, state or local law. If you need accommodations for any part of the employment process because of a disability, please send an e-mail to&nbsp;<a href="mailto:talent@hain.com" target="_blank">talent@hain.com</a>&nbsp;or call 516-587-5000 to let us know the nature of your request. EEO/AA/M/F/Veteran/Disabled

Hain Celestial Group

Lead Maintenance Mechanic (Swing Shift)

Job Title STEPS Warehouse Worker Requisition Number TE08398 Department Name 3DP02:Surplus Work Location Lexington, KY Salary Range $15.50/hr Type of Position Temporary Position Time Status Full-Time Required Education Required Related Experience Required License/Registration/Certification Physical Requirements Lifting, pushing, or pulling of objects up to 75 pounds, standing, and walking. Shift Monday – Friday, 7 a.m. – 4 p.m. Job Summary This position is in a warehouse environment and helps to ensure that Surplus functions, trucking efforts, and the warehouse organization operate at maximum efficiency. You will be assisting with the receiving and processing of surplus deliveries and equipment while maintaining the safety, cleanliness, and orderly condition of the Surplus warehouse. In addition, you will assist with coordinating surplus auctions, helping customers with item pickups, processing all necessary warehouse paperwork, and other duties as assigned. Interaction with internal and external customers takes place daily, so good customer service skills are key to this position. Skills / Knowledge / Abilities Does this position have supervisory responsibilities? No Preferred Education/Experience Deadline to Apply 08/08/2024 University Community of Inclusion The University of Kentucky is committed to a diverse and inclusive workforce by ensuring all our students, faculty, and staff work in an environment of openness and acceptance. We strive to foster a community where people of all backgrounds, identities, and perspectives can feel secure and welcome. We also value the well-being of each of our employees and are dedicated to creating a healthy place to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

STEPS Warehouse Worker

25-Jul-2024<h4>Inventory and Procurement Operations Specialist</h4>Harvard University Information Technology 66335BRJob SummaryHUIT is responsible for refreshing approximately 6000-7000 computers every 3 or 4 years for Central Administration and FAS. This position will be responsible for supporting the processes involved in deploying these endpoints including client/desktop systems administration, computer equipment transport, tracking university assets, and security administration. In support of these refreshes and non-refresh orders, this role will also support the Procurement &amp; Inventory Management Specialist in processing orders and receipt of these orders.   The unifying characteristics of the position are outstanding organizational skills, written/oral communication skills, and the ability to help teams and projects successfully accomplish their objectives. Ideal candidates thrive on variety in their daily work, working in a fast-paced environment, and possess versatility and breadth in their technical skills.Position DescriptionHarvard University Information Technology (HUIT) is a community of Information Technology professionals committed to delivering service and technological solutions in support of teaching, learning, research and administration.&nbsp; We are recruiting an IT workforce that has both breadth in their ability to collaborate and innovate across disciplines – and depth in specific areas of expertise. HUIT offers opportunities for IT professionals to learn and work in a unique technology landscape and service-focused environment. If you are a technically proficient, nimble, user-focused, and accountable IT professional who also connects with the importance of collaborating well in a team environment, we are looking for you! Warehouse Inventory Duties &amp; Responsibilities:<ul><li>Conduct the delivery and pickup of IT equipment to various storage and distribution points across the Harvard campus.    &nbsp;</li><li>Responsible for;<ul><li>using a departmental scanner to track inventory throughout the delivery process.</li><li>driving and upkeeping the departmental delivery vehicles in accordance with university and local policies.</li></ul></li><li>Document and communicate deliveries via photographs and messaging.  &nbsp;</li><li>Adhere to daily schedule and proactively communicate any expected delays to team.  &nbsp;</li><li>Maintain;<ul><li>supplies and documentation at HUIT depots.</li><li>and update asset data records in HUIT’s ticketing tool and databases. This includes computers received, deployed, and retired.</li></ul></li><li>Image, prepare, and configure computers for deployment following documented procedures and policies.  &nbsp;</li><li>Ensure;<ul><li>assets are properly tracked throughout their lifecycles. This includes maintaining records of current inventory, replenishing revolving inventory with incoming equipment, processing incoming inventory, monitoring inventory thresholds, notifying management of inventory issues in a timely manner.</li><li>correct materials are pulled, organized, staged, and packed correctly for shipment to campus locations. </li></ul></li><li>Work with<ul><li>the Refresh Coordinator to properly process assets for retirement and&nbsp;with team to prepare warehouse space for deliveries, lease returns, and disposals. &nbsp;</li><li>vendors as appropriate to support departmental goals. &nbsp;</li></ul></li><li>Assist in shipping of computing equipment to off-campus recipients. &nbsp;</li><li>Schedule and prepare pallets for delivery to vendors or on campus customers. &nbsp;</li><li>Test and/or troubleshoot desktop technology and software as needed to support departmental objectives. &nbsp;</li><li>Additional tasks as required. &nbsp;</li></ul> &nbsp;Procurement Operations Duties &amp; Responsibilities &nbsp;<ul><li>Act as a backup to the primary Procurement staff including to but not limited to the duties below. &nbsp;</li><li>Purchase all supported and requested computer-related hardware (computers, peripherals, supplies, etc.) and software via documented procurement processes.  &nbsp;</li><li>Receive all hardware/software orders within Harvard’s procurement system upon receipt of the item, where applicable. Includes asset management input, ticket management and desktop management input.  &nbsp;</li><li>Tracking and monitoring orders  &nbsp;</li><li>Maintain accurate and current records with the ticketing system.  &nbsp;</li><li>Coordinate package delivery including proper label of packages, ensures going to the proper location, resolving issues and questions.  &nbsp;</li><li>Process fellow HUIT partner’s technology orders including receiving, labeling, space allocation, and communication</li></ul>Basic Qualifications<ul><li>1+ years working in a computer-related environment or relevant experience.  &nbsp;</li><li>Experience with Windows operating systems (MacOS a plus) and hardware in a computer support related setting; experience working in a networked environment.  &nbsp;</li><li>Demonstrated ability to utilize new software applications and technologies. &nbsp;</li><li>Must possess clear/precise written/oral communications skills and&nbsp;have the ability to interact with technical staff and work in a team-oriented, customer-focused environment. &nbsp;</li><li>Ability to demonstrate an extraordinary level of organization and should have experience in a fast-paced environment. &nbsp;</li><li>Valid driver’s license</li></ul>Additional Qualifications and Skills<ul><li>Ability to understand and adhere to schedules &nbsp;</li><li>Experience with SCCM and JAMF a plus. </li></ul>Working Conditions<ul><li>Must be able to bend, push, pull, stoop, climb, stand and lift up to 45 pounds frequently (occasional heavier items).</li><li>A willingness to work occasional evenings and weekends if ever needed to meet clients’ deadlines. &nbsp;</li></ul>Additional InformationPlease provide a cover letter with your application. Please note:<ul><li>Harvard University requires pre-employment reference and background screening.&nbsp;</li><li>We are unable to provide work authorization and/or visa sponsorship.&nbsp;</li><li>This position has a 180-day orientation and review period.&nbsp;</li></ul>The health of our workforce is a priority for Harvard University. With that in mind, we strongly encourage all employees to be up-to-date on CDC-recommended vaccines. Accessibility: Harvard University welcomes individuals with disabilities to apply for positions and participate in its programs and activities. If you would like to request an accommodation or have questions about the physical access provided, please contact our University Disability Resources Department.&nbsp;Work Format DetailsHUIT actively supports hybrid work where business needs allow. This position has been designated as a fully on-site position (5 days per week). Additional details will be discussed during the interview process. All remote work must be performed within one of the Harvard Registered Payroll States, which currently includes Massachusetts, Connecticut, Maine, New Hampshire, Rhode Island, Vermont, Georgia, Illinois, Maryland, New Jersey, New York, Virginia, Washington, and California (CA for exempt positions only). Certain visa types and funding sources may limit work location. Individuals must meet work location sponsorship requirements prior to employment.About UsHarvard University Information Technology (HUIT) is responsible for the strategy, planning, and delivery of information technology across the University.&nbsp; Our mission is to assure Harvard’s leadership in IT. We strive to make it easier for faculty, students, and staff to teach, research, learn and work through the effective use of information technology.&nbsp; HUIT’s core values are User Focused, Collaborative, Innovative and Open. HUIT’s core values are:&nbsp;<ul><li>User-focused&nbsp;</li><li>Collaborative&nbsp;</li><li>Innovative&nbsp;</li><li>Open&nbsp;</li></ul>IT Academy (designed for IT Staff): HUIT’s IT Academy aims to enable each IT staff person to grow professionally and become a trusted partner to her or his team. The IT Academy is built on the belief that every IT staff member across the University (including technology employees at each school and campus) can grow in her or his area of expertise as well as building strong people and project management skills. Learn more here: <a href="https://itacademy.harvard.edu/&amp;nbsp" target="_blank">https://itacademy.harvard.edu/&amp;nbsp</a>;BenefitsWe invite you to visit Harvard's Total Rewards website (<a href="https://hr.harvard.edu/totalrewards" target="_blank">https://hr.harvard.edu/totalrewards</a>) to learn more about our outstanding benefits package, which may include: <ul><li>Paid Time Off: 3-4 weeks of accrued vacation time per year (3 weeks for support staff and 4 weeks for administrative/professional staff), 12 accrued sick days per year, 12.5 holidays plus a Winter Recess in December/January, 3 personal days per year (prorated based on date of hire), and up to 12 weeks of paid leave for new parents who are primary care givers.</li><li>Health and Welfare: Comprehensive medical, dental, and vision benefits, disability and life insurance programs, along with voluntary benefits. Most coverage begins as of your start date.</li><li> Work/Life and Wellness: Child and elder/adult care resources including on campus childcare centers, Employee Assistance Program, and wellness programs related to stress management, nutrition, meditation, and more.</li><li>Retirement: University-funded retirement plan with contributions from 5% to 15% of eligible compensation, based on age and earnings with full vesting after 3 years of service.</li><li>Tuition Assistance Program: Competitive program including $40 per class at the Harvard Extension School and reduced tuition through other participating Harvard graduate schools.</li><li>Tuition Reimbursement: Program that provides 75% to 90% reimbursement up to $5,250 per calendar year for eligible courses taken at other accredited institutions.</li><li> Professional Development: Programs and classes at little or no cost, including through the Harvard Center for Workplace Development and LinkedIn Learning.</li><li>Commuting and Transportation: Various commuter options handled through the Parking Office, including discounted parking, half-priced public transportation passes and pre-tax transit passes, biking benefits, and more.</li><li> Harvard Facilities Access, Discounts and Perks: Access to Harvard athletic and fitness facilities, libraries, campus events, credit union, and more, as well as discounts to various types of services (legal, financial, etc.) and cultural and leisure activities throughout metro-Boston.</li></ul>Job FunctionInformation Technology Department Office LocationUSA - MA - Cambridge Job Code403058 IT Support Assistant II Work FormatOn-Site Sub-Unit------------ Salary Grade053DepartmentClient ServicesUnion55 - Hvd Union Cler &amp; Tech Workers Time StatusFull-time Pre-Employment ScreeningDMV, IdentitySchedule<ul><li>A willingness to work occasional evenings and weekends if ever needed to meet clients’ deadlines. &nbsp;</li></ul>Commitment to Equity, Diversity, Inclusion, and BelongingHarvard University views equity, diversity, inclusion, and belonging as the pathway to achieving inclusive excellence and fostering a campus culture where everyone can thrive. We strive to create a community that draws upon the widest possible pool of talent to unify excellence and diversity while fully embracing individuals from varied backgrounds, cultures, races, identities, life experiences, perspectives, beliefs, and values.EEO StatementWe are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, pregnancy and pregnancy-related conditions, or any other characteristic protected by law.LinkedIn Recruiter Tag (for internal use only)#LI-AS1

Harvard University FAS Human Resources

Inventory and Procurement Operations Specialist

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SUPPLY CHAINRocket Lab’s Supply Chain team is responsible for the flow of all materials, products, and components through the business. With many of our own products functioning as critical components to our own and our customers’ missions, the Supply Chain team has a direct impact on the success of our rocket and satellite programs. They set up the assembly kits that enables our technicians to put together our Electron rockets, manage inventory, look after shipping and receiving, manage direct and indirect procurement, and inspect and ensure that all of our materials and products are compliant and up to standard. They are the chain that links our teams together, and are critical to our success.&nbsp;SENIOR MANAGER, INVENTORY AND LOGISTICSBased onsite at Rocket Lab’s new Middle River, MD facility, the Senior Manager of Inventory and Logistics leads a team responsible for inventory controls &amp; the daily execution activities of expediting, receiving, storage, picking, packing, and local dispatch.&nbsp; This leader will be very hands on working directly with team members to maintain high service levels to internal and external customers, order fulfillment, DIFOT, inventory accuracy and adherence to standard operating procedures.WHAT YOU’LL GET TO DO<ul><li>Direct a team of people responsible for inventory management, material handling, and shipping and receiving.</li><li>Accountable for inventory controls, perpetual inventory reporting, on-time delivery of material from inventory to production, and packaging solutions to prevent damage to parts.</li><li>Responsible for implementing systems and processes, to manage bar-coding and bin locations for inventory management.</li><li>Responsible for inventory planning and kitting process, to deliver materials line-side to production cells.</li><li>Responsible for ensuring inventory accuracy and cycle counts are meeting Finance requirements.</li><li>Responsible for ensuring shipping and receiving processes are in place and support procure to pay process.</li><li>Responsible for receiving Inspection, to ensure parts meet specifications.</li><li>&nbsp;domestically and abroad.</li><li>Additional duties as reasonably required.</li></ul>YOU’LL BRING THESE QUALIFICATIONS<ul><li>Associate's degree and 10+ years of experience.</li><li>5+ years of related experience in leadership within supply chain</li><li>Proven ability to manage inventory teams.</li><li>Proven ability to implement systems and tools for material management.</li><li>Proficient in MS Office, ERP systems, math and statistics</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE<ul><li>Bachelor's Degree</li><li>Strong organizational and problem-solving skills, with the ability to prioritize effectively and efficiently.</li><li>Excellent verbal and written communication abilities</li><li>Team oriented, strong ability to multi-task and work in a fast-paced environment and to multiple deadlines</li><li>Experience in aerospace, automotive, or other heavy manufacturing.</li><li>Experience with ERP Systems</li><li>Prior experience in high-paced, rapid growth environment</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.&nbsp;&nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li></ul>WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Senior Manager, Inventory and Logistics

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!SENIOR MANUFACTURING ENGINEER - MACHININGWe are currently seeking a Senior Manufacturing Engineer with a focus in Machining based out of Rocket Lab's Headquarters in Long Beach, CA. They will be responsible for the machining development of new products and product revisions as related to the Rutherford engine (currently in use on the 2nd most frequently launched US rocket), and the Archimedes engine where they will have an opportunity to get in on the ground floor of a novel rocket engine build!WHAT YOU’LL GET TO DO:<ul><li>Contribute to design reviews acting as an expert in design for manufacture, design for machining, productivity, quality control, etc.</li><li>Select, procure, and install machine shop equipment along with developing maintenance/calibration plans.</li><li>Develop machining capability in-house for the Archimedes components and implement rapid iterations.</li><li>Design, develop, and implement tooling and equipment for use in a production environment where appropriate to improve quality, delivery and/or cost performance.</li><li>Responsible for continuous improvement and cost reduction projects belonging to the fabrication department.</li><li>Collaborate with other Rocket Lab machine shops for general alignment, capability, and support.</li><li>Develop and mentor less experienced engineers and machinist daily.</li></ul>QUALIFICATIONS YOU’LL BRING AS A SENIOR MANUFACTURING ENGINEER - MACHINING:<ul><li>Bachelor’s degree in mechanical, aerospace, manufacturing engineering, or equivalent.</li><li>5+ years of machine shop experience.</li><li>Ability to rapidly iterate NX CAM programs and operate 5-axis CNC equipment.</li><li>Well versed in GD&amp;T and inspection methods.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping.</li><li>8+ years of machine shop experience.</li><li>Experience with 3D CAD software and tooling design.</li><li>Experience machining turbomachinery and combustion device components.</li><li>Familiarity with post processing methods, AM and welding.</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. &nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. &nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$100,000—$150,000 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Manufacturing Engineer - Machining

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!&nbsp;SENIOR MANUFACTURING ENGINEER, COMPOSITESWe are currently seeking a Senior Manufacturing Engineer, Compositesbased out of Rocket Lab's newest Space Structures Complex production facility in Middle River, MD. The Senior Manufacturing Engineer, Composites will be responsible for the development, implementation, and continuous improvement of composite manufacturing technologies and processes used in the production of the Neutron Launch Vehicle structure.&nbsp;WHAT YOU’LL GET TO DO:&nbsp;<ul><li>Identify, plan, and execute capital equipment, machine, and layout definitions to the meet volume requirements including preparation of business cases&nbsp;&nbsp;</li><li>Develop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor sign-offs</li><li>Design, develop, and implement tooling and equipment for use in a production environment where required to achieve safety, quality, delivery and cost requirements</li><li>Actively contribute to facility construction projects including requirements generation, design reviews and implementation support</li><li>Contribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc.&nbsp;</li><li>Oversee introduction and implementation of new products and product revisions as related to the Neutron launch vehicle composite structure</li><li>Lead problem containment and structured root cause &amp; corrective action investigations</li><li>Quickly analyze and resolve manufacturing discrepancies and non-conformances</li><li>Introduce automation where appropriate and ensure equipment data links directly to MRP and quality systems</li><li>Identify risks and improvements to develop the manufacturing engineering department to meet company needs</li><li>Develop and mentor less experienced engineers and technicians daily&nbsp;&nbsp;</li></ul>&nbsp;YOU’LL BRING THESE QUALIFICATIONS:&nbsp;<ul><li>Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or other technical degree.</li><li>5 + years of composite manufacturing experience.&nbsp;</li><li>Experience in the selection, procurement, and installation of composite manufacturing equipment. &nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping.&nbsp;</li><li>Experience with 3D CAD software and tooling design.&nbsp;</li><li>Experience in Automated Fibre Placement technology.&nbsp;</li><li>Experience both Autoclave and Out-of-Autoclave composite manufacturing techniques.&nbsp;</li><li>Experience with Non-Destructive Testing/Inspection of composite components.&nbsp;</li><li>Experience in qualification and acceptance testing of composite structural components.&nbsp;</li></ul>ADDITIONAL REQUIREMENTS<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.&nbsp;&nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li></ul>WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Manufacturing Engineer, Composites

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle designed to deliver the mega constellations of tomorrow, high assurance payloads, with the potential for human spaceflight too. As a reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of reusable liquid launch vehicle, this is your opportunity!SENIOR MANUFACTURING ENGINEER, VEHICLE INTEGRATIONWe are currently seeking a Manufacturing Engineer, Vehicle Integration to work out of Rocket Lab's newest production facility in Middle River, MD.&nbsp; The Manufacturing Engineer, Vehicle Integration will be responsible for the development, implementation, and continuous improvement of equipment, tooling, and processes used in the final assembly, integration and testing of the Neutron Launch Vehicle. They will support the Director of Production, Neutron Stages and Launch Systems Development organization, with deliverables required for internal leadership, board of directors, and investors.&nbsp;WHAT YOU’LL GET TO DO:&nbsp;<ul><li>Identify, plan, and execute capital equipment, machine, and layout definitions to the meet volume requirements including preparation of business cases&nbsp;&nbsp;</li><li>Develop production processes and ensure they are accurately and clearly documented, including testing procedures, health and safety requirements and supervisor sign-offs.&nbsp;&nbsp;&nbsp;</li><li>Design, develop, and implement tooling and equipment for use in a production environment where required to achieve safety, quality, delivery and cost requirements&nbsp;&nbsp;</li><li>Actively contribute to facility construction projects including requirements generation, design reviews and implementation support&nbsp;&nbsp;</li><li>Contribute to design reviews acting as an expert in design for manufacture, design for test, productivity, supplier capability assessments, quality control, etc.&nbsp;&nbsp;</li><li>Oversee introduction and implementation of new products and product revisions as related to the Neutron launch vehicle&nbsp;&nbsp;</li><li>Lead problem containment and structured root cause &amp; corrective action investigations&nbsp;&nbsp;</li><li>Quickly analyze and resolve manufacturing discrepancies and non-conformances&nbsp;&nbsp;</li><li>Introduce automation where appropriate and ensure equipment data links directly to MRP and quality systems&nbsp;&nbsp;</li><li>Identify risks and improvements to develop the manufacturing engineering department to meet company needs&nbsp;&nbsp;</li><li>Develop and mentor less experienced engineers and technicians daily&nbsp;&nbsp;</li></ul>&nbsp;YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR MANUFACTURING ENGINEER:&nbsp;<ul><li>Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or equivalent.&nbsp;</li><li>5 + years of experience in the assembly, integration and testing of complex systems.&nbsp;&nbsp;</li><li>Experience in the selection, procurement, and installation of manufacturing equipment.&nbsp;&nbsp;</li><li>Technical project management or manufacturing design experience&nbsp;</li><li>Advanced understanding of mechanical design principals&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping.&nbsp;</li><li>Detailed knowledge of Siemens NX or similar CAD and PLM packages&nbsp;</li><li>Proficient in reading and interpreting engineering drawings and GD&amp;T&nbsp;</li><li>Project management experience in a fast-paced prototype fabrication shop environment&nbsp;</li><li>Detailed knowledge of quality standards for typical fabrication and production products&nbsp;</li><li>Proficient with all types of hand tools and basic fabrication equipment&nbsp;</li></ul>ADDITIONAL REQUIREMENTS<ul><li>Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus.&nbsp;&nbsp;&nbsp;</li><li>Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing.&nbsp;&nbsp;</li><li>Must be physically able to commute to buildings&nbsp;</li><li>Occasional exposure to dust, fumes and moderate levels of noise.&nbsp;</li></ul>WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Manufacturing Engineer, Vehicle Integration

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!ABOUT SPACE SYSTEMS AT ROCKET LAB:Rocket Lab’s Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions.WHAT YOU’LL GET TO DO:This position will work closely, and develop strong relationships with other Engineers, Technicians and subject matter experts across a range of departments to enable effective production, test and operation of Rocket Lab Spacecraft.The primary purpose of the Space Systems Manufacturing Engineer - Mechanical is to facilitate and optimise production of Spacecraft systems and sub-systems for a high-growth, high-consequence production environment, ensuring best-practice manufacturing principles are employed to meet stringent deadlines.<ul><li>Taking ownership of Spacecraft mechanical production lines</li><li>Supporting build of Spacecraft mechanical systems in a hands-on capacity</li><li>Practicing continuous improvement and lean manufacturing techniques</li><li>Managing project timelines</li><li>Understanding technical and program risks</li><li>Leading non-conformance and root cause analysis investigations</li><li>Creating technical documentation</li><li>Advising on design improvements for components, subsystems, procedures, equipment and tooling</li><li>Driving action towards achieving departmental KPIs</li></ul>YOU’LL BRING THESE QUALIFICATIONS:<ul><li>Bachelor’s degree or equivalent in Mechanical, Mechatronics or Aerospace Engineering</li><li>Hands-on experience with complex mechanical systems within a manufacturing environment</li><li>Knowledge of common mechanical mechanisms, assembly processes, fluid delivery systems and associated testing</li><li>Proven ability to deliver KPI’s (with little to no supervision) on schedule, as an individual or as a member of an integrated team</li><li>Can-do approach and flexibility to thrive around growing teams and processes</li><li>Excellent communication skills, both written and verbal</li><li>Proven risk assessment and risk-based decision-making skills</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Working experience with environmental acceptance/production acceptance testing, such as vibration, shock, thermal and vacuum</li><li>Understanding of instrumentation, interfaces, and sensors including power supplies, accelerometers, thermocouples, RTDs, and pressure sensors</li><li>Knowledge of production quality metrics</li><li>Experience with ERP/PM Systems - Siemens Team Center/Infor LN</li><li>Experience in configuration control and configuration management in production systems</li><li>Demonstrated experience with DFMEA, PFMEA methodologies, Fault Tree Analysis, Pareto analysis, root cause and corrective actions</li><li>Proven ability to deliver new product implementation activities on time and to budget</li><li>Familiar with engineering change processes and implementation in production environments</li><li>Understanding of process qualification theory</li></ul>If you meet 50% of the requirements in this job ad – we want to hear from you with a variety of openings currently- Apply Now!&nbsp;WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

158 Industrial work / Manufacturing Jobs